BQ Aquaris X Pro (codename: bardockpro) launched in April 2017. The handset came with Android 7.1.1 Nougat. In this tutorial, we will show you how to install the AOSP Android 11 on BQ Aquaris X Pro (bardockpro). Recently, Google released its latest stable Android 11 for the general public. And with that, many OEMs were quick to adopt the same. First in the line were the Pixel devices, which were anyways along the expected lines. Later Google released the AOSP source code for Android 11 which is undoubtedly the main ingredient to compile Android 11-based custom ROMs.

Talking about the specifications, BQ Aquaris X Pro features a 5.2-inch IPS LCD display with a screen resolution of 1080 x 1920 Pixels. It is powered by Qualcomm Snapdragon 626 MSM8953 Processor coupled with 3/4GB of RAM. The phone packs 32/64/128GB internal memory with expandable storage support of 256GB via microSD card. The camera on the BQ Aquaris X Pro comes with 12MP rear camera with dual-LED dual-tone flash and 8MP front camera for selfies. It is backed by a Non-Removable 3,100 mAh Lithium-Polymer Battery. BQ Aquaris X Pro also has a fingerprint sensor on the back.

Android 11 and It’s Features:

Well, Android 11, Google’s 11th iteration looks similar to Android 10 but with a handful of new features and changes. The update brings notification history, Chat bubbles, Conversation notifications, screen recorder, new media controls, smart device controls, one-time permission, improved dark theme with the scheduling system, app suggestions, wireless android auto, and many more. For more, check out our article Android 11 supported list, Android 11 Custom ROM list, best Android 11 features, and many more.

How to Install AOSP Android 11 on BQ Aquaris X Pro:

With such a long list of goodies to offer, no doubt you will want to try out the AOSP Android 11 on BQ Aquaris X Pro (bardockpro). But before we list out the installation steps, please go through the prerequisites section. Make sure your device meets all the mentioned requirements. After this, go through the working features and the list of known issues present in this ROM. Once you have gone through all the requirements section, you may then proceed with the installation steps.

Prerequisites

  • Tested only on BQ Aquaris X Pro (bardockpro)
  • First and foremost, create a complete device backup.
  • Next time, enable USB Debugging on your BQ Aquaris X Pro. This will make your device recognizable by your PC in ADB mode. So head over to Settings > About Phone > Tap on Build Number 7 times > Go back to Settings > System > Advanced > Developer Options > Enable USB Debugging.
  • Your device also needs to have the bootloader unlocked. If you haven’t done so, then refer to our detailed guide on How To Unlock Bootloader On BQ Aquaris X Pro.
  • Next up, you will also need to install the TWRP Recovery on your device. This will be needed to flash the AOSP Android 11 on your BQ Aquaris X Pro. You could refer to our comprehensive tutorial on how to Install TWRP Recovery For BQ Aquaris X Pro.

Download AOSP Android 11

Before you download the firmware file, there is a pretty important worth mentioning. You should only use the proper vendor and firmware of your device of stable ROM.

  • Download Official Lineage OS 17.1 for BQ Aquaris X Pro based on Android 10 Q
  • How to Install Stock ROM on BQ Aquaris X Pro [Firmware/Unbrick]
  • List of Best Custom ROM for BQ Aquaris X Pro [Updated]
  • How To Root And Install Official TWRP Recovery For BQ Aquaris X Pro
  • Download and Install AOSP Android 10 Q for BQ Aquaris X Pro

Once you have downloaded the above files, transfer it to your device. Then proceed with the below steps to install AOSP Android 11 on your BQ Aquaris X Pro (bardockpro) device.

Downloads

Lineage OS 18: Download Link

Download Android 11 Gapps

Install AOSP Android 11 on BQ Aquaris X Pro (bardockpro)

  • Connect your device to PC via USB cable. Make sure USB Debugging is enabled.
  • Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
  • Execute the below command in the CMD window to boot your device to TWRP Recovery:
  • adb reboot recovery
  • Now head over to the wipe section and format system, data, and cache. Perform a right swipe to complete the format.
  • TWRP Home
  • Its now time to flash the AOSP Android 11 ROM onto your BQ Aquaris X Pro. For that, head over to Install, select the AOSP ROM ZIP file and perform a right swipe to install the file.
  • If you want Google Apps as well, then you need to flash it at this instance itself. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
  • When that is done, you may reboot your device. Head over to Reboot and select System.

Your device will now boot to the newly installed OS. With this, we conclude the guide on how to install the AOSP Android 11 on BQ Aquaris X Pro. Do keep in mind that the first boot might take up some time and you might have to set up your device from scratch.

Warning

adb reboot recovery

TWRP Home

Furthermore, once you have installed the ROM, do share your opinions about the same in the comments section. Rounding off, here are some iPhone Tips and Tricks, PC tips and tricks, and Android Tips and Trick that you should check out as well.