Realme X7 Max 5G was launched in India with a MediaTek Dimensity 1200 processor and triple rear cameras. The smartphone comes with a 120Hz Super AMOLED display and supports 50W fast charging. Realme X7 Max 5G (codenamed: RMX3031) launched in May 2021. The phone came out of the box with Android 11 and was later upgraded to Android 12. On this page, we will guide you to install the unofficial Android 13 Custom ROM on Realme X7 Max 5G. If you are someone who wants to install the vanilla version of Android 13, then this guide is for you.

Also Read

List of Best Custom ROM for Realme X7 Max 5G [Updated]

Realme X7 Max 5G Overview

The Realme X7 Max features a 6.43-inch Super AMOLED panel with a resolution of 1080 x 2400 pixels and an aspect ratio of 20:9. It is a high refresh rate panel with a 120Hz refresh rate. It also has a peak brightness of 1000 nits. Under the hood, we have the MediaTek Dimensity 1200 5G built on a 6nm manufacturing process. It is an octa-core processor with one Cortex-A78 core clocked at 3.0 GHz, three Cortex-A78 cores clocked at 2.6 GHz, and four Cortex-A55 cores clocked at 2.0 GHz. We have the Mali-G77 MC9 as the GPU for the smartphone.

We have a triple camera setup at the rear side and a single camera at the front in terms of optics. The rear camera consists of a 64MP primary sensor paired with an f/1.8 lens, an 8MP ultrawide sensor paired with an f/2.3 lens, and a 2MP macro sensor paired with an f/2.4 lens. Coming to the front, we get a single 16MP sensor paired with an f/2.5 lens. The rear setup can capture 4K videos at 60 fps, while the front camera is only limited to 1080p video recording.

The Realme X7 Max 5G comes with Android 11 out of the box with Realme UI 2.0 skin on top. There are two storage variants of this smartphone: 8GB RAM + 128GB internal storage and 12GB RAM + 256 internal storage. Realme went with UFS 3.1 here for the storage.

In terms of communications, we have Wi-Fi 802.11 a/b/g/n/ac/6, Bluetooth 5.1, GPS, NFC, and USB Type-C 2.0. For sensors, we have an under-display optical fingerprint sensor, accelerometer, gyro, proximity, and compass. Powering it all is a 4500 mAh battery that can be topped up quickly using the 50W charging adapter included in the box. The company claims that it goes from 0%-50% in just 16 minutes. The smartphone comes with three-color options: Mercury Silver, Asteroid Black, and Milky Way.

Android 13 and Its Features

Google has finally started rolling their stable Android 13 update to the public. As expected, only Google has released the update to their Pixel lineup, but no OEM has started cooking a stable yet.

Regarding the Android 13, it seems that the Android 12’s successor has plenty of additional features and improvements to its predecessor. We’ve already seen and used the major UI and design element changes in Android 12 last year, known as ‘Material You.’ This materialistic theming design enhanced the Android user experience from the minimal subtle look, rounded corners, improved pop-ups, etc.

Whereas the improved scrolling screenshots, optimized one-handed UI mode, better privacy & security features, improved app notifications, per-app basis language preferences, app permissions to send notifications, BT LE Audio support, auto theme icons, updated now playing widget, etc. Users will also find intuitive QR scanner support, enhanced silent mode, tap-to-transfer media controls, multiple profiles for NFC payments, and more.

What’s Working and Known Bugs:

Whats working?

Wi-Fi RIL Volte Mobile data GPS Camera Flashlight Camcorder Bluetooth Fingerprint FM radio Sound vibration

Known issues ? You tell me

How to Install AOSP Android 13 on Realme X7 Max 5G (RMX3031)

As the title suggests, we’ve shared the requirements and steps to flash the AOSP Android 13 build on the Realme X7 Max 5G (RMX3031) variant.

Before heading over to the guide, make sure to follow all the requirements below.

Pre-Requisites

Before we begin with this procedure, I would strongly recommend you create a backup of your device storage and all your files stored on your device. Moreover, following the steps mentioned in this post carefully is advised to avoid permanent damage or bricking your device.

Charge Your Phone

It’s highly recommended to charge your handset before unlocking the bootloader to avoid your device from shutting down occasionally while going through the process. Make sure to keep at least 50% of charge or higher for a smooth operation.

Download ADB and Fastboot Binaries

You can skip this adb and fastboot part if you have already installed TWRP Recovery on your Realme X7 Max 5G.

Using the ADB and Fastboot command (platform-tools), you’ll be able to boot your Android device into the bootloader mode (download mode), which will be easy for you to proceed with further steps. ADB (Android Debug Bridge) creates a connection or bridge between the device and computer to sideload files.

Fastboot is a more advanced command utility tool for Android devices that works with computers. You can download ADB and Fastboot Binaries (Platform-Tools).

Advertisement

Download Realme USB Drivers

A USB Driver is a set of files that allows you to create a successful and strong connection between a mobile device with a computer properly using a USB data cable. It’ll be useful to transfer files between the connected devices, flash files on the handset, and more.

It’s also worth mentioning that mobile devices and other external devices can use and run USB Drivers on a Windows computer. Such as a mouse, keyboard, printer, external hard drives, speakers, USB flash drives, etc. You can grab Realme USB Drivers here.

Unlock Bootloader Your Phone:

You must first unlock the bootloader on your Realme X7 Max 5G to enjoy any custom ROM.

Install TWRP Recovery:

You must install TWRP Recovery on your phone to install any custom ROM on your device. After unlocking the bootloader, follow our guide to install TWRP Recovery on your Realme X7 Max 5G.

Download Android 13 ROM:

Here, you will find all the Android 13 custom ROM for your Realme X7 Max 5G (RMX3031).

Download Android 13 Gapps:

It’s worth mentioning that most of the third-party AOSP (Android Open Source Project) ROMs (also known as aftermarket firmware) come without any preinstalled Google apps package. You can manually install the Android 13 GApps by following our guide.

Instructions to Install:

  • Connect your device to the PC via USB cable. Make sure USB Debugging is enabled.
  • Then head over to the platform-tools folder, type in CMD in the address bar, and hit Enter. This will launch the Command Prompt.
  • Execute the below command in the CMD window or enter recovery mode by using the Volume and Power button combination. your device to TWRP Recovery:
  • adb reboot recovery
  • Now head over to the Install section and navigate to the downloaded vendor and firmware. Perform a right swipe to flash it.TWRP Home
  • If you want Google Apps as well, then you need to flash it at this instance itself. Go to Install, select the GApps ZIP file, and perform a right swipe to flash this file.
  • When that is done, you may reboot your device. Head over to Reboot and select System.

Your device will now boot to the newly installed OS. With this, we conclude the guide on installing the AOSP Android 13 on Realme X7 Max 5G. Remember that the first boot might take time, and you might have to set up your device from scratch.

Warning!

GetDroidTips won’t be responsible for any issue that may happen to your device if you flash it on another device and brick it. Do it at your own risk.

adb reboot recovery

Conclusion

Flashing the ported Android 13 on your Realme X7 Max 5G will give you an early taste of the latest Android OS version. It looks like the Realme X7 Max 5G model won’t officially receive the Android 13 update from the manufacturer. So, it’s a good idea to get most of the features and visual treatment. However, if you find any extra bugs or stability issues, you should report them to the respective forum.

That’s it, guys. We assume this guide was helpful to you. For further queries, you can comment below.