Today Motorola has finally rolled the Android 11 update to the Motorola Razr 5G globally which brings all the Android 11 features and customization. In this guide, we will show you how to install the Android 11 firmware file manually on Motorola Razr 5G.
Motorola Razr 5G – Device Overview
Although the Motorola Razr 5G brings back the nostalgia of the icon Razr phone, the specs under the hood do not justify its ultra-premium $1400 price tag. It comes powered by a Snapdragon 765G chipset which is the best mid-range 5G chipset from Qualcomm and is not the flagship processor. This is coupled with 8GB of RAM and comes with 256GB of onboard storage with no dedicated card slot for memory expansion. The display on the phone is a foldable P-OLED panel that sizes 6.2-inches.
The Motorola Razr 5G also sports a secondary display on the outside which is 2.7 inches and has a 600 x 800 pixels resolution. The phone camera with Android 10 out of the box and runs almost stock Android with some Motorola apps. Coming to the cameras, there is a not-so-good 48MP lens that is capable of recording 4K@30fps, 1080p@30/60/120fps. For selfies, there is a 20MP f/2.2 lens capable of recording 1080p@30fps. The fingerprint scanner on the Motorola Razr 5G is mounted on the back of the phone inside the logo. Under the hood, the battery is of surprisingly pretty less capacity and it stands at 2800 mAh. It supports 15W charging which is no close to its counterparts.
Download Motorola Razr 5G Android 11 Update
Here you can download the official Android 11 for the Motorola Razr 5G.
Steps to Install Motorola Razr 5G Android 11 Update:
Now, if you’re ready to flash the Android 11 manually on your Motorola Razr 5G device then you need to download the drivers, firmware file, and tools. So, without wasting any more time, let’s get into it.
Pre-Requirements:
- This ROM is supported for the Motorola Razr 5G variant only.
- Make sure that your device should be charged at least 50% or higher.
- You will require a PC or Laptop with a USB Data Cable.
- We always recommend our readers take a full data backup of the device for safety purposes.
- Install Motorola USB Drivers and Rescue and Smart Assistant Tool on your PC
- Download ADB and Fastboot Tool or Android SDK Platform tool
Firmware Installation Guide:
Check out the firmware flashing guide below for the Motorola Razr 5G. First, make sure to install or extract the adb and fastboot tool on your PC. Now enter the bootloader on your device.
Disclaimer:
Step 1. Bootloader Mode
Enter bootloader mode on your phone. To boot first, turn your phone off. Once your device turned off completely, press and hold the volume down, and turn it on. You should see the bootloader screen.
Step 2. Connect Your Device to PC:
After booting your Motorola Razr 5G into bootloader mode, now connect it to the PC using the USB Cable.
Step 3. Download Stock ROM/Firmware:
To get the full ROM, you can use the LMSA or Rescue and Smart Assistant Tool. Download the zip file and copy it to somewhere on your PC. LMSA tool will unzip the file and will remove the zip file you downloaded.
You can also download the full stock ROM from the above download flash file section on this guide.
Step 4. Flashing Guide:
- The next step is to open the command window and go to the adb folder
- Enter the following command to flash the firmware.
- fastboot flash partition gpt.bin
- fastboot flash bootloader bootloader.img
- fastboot flash bluetooth BTFM.bin
- fastboot flash dsp dspso.bin
- fastboot flash radio radio.img
- fastboot flash logo logo.bin
- Now toggle the fastbootd
- fastboot reboot fastboot
- Again flash the following command
- fastboot flash boot boot.img
- fastboot flash recovery recovery.img
- fastboot flash dtbo dtbo.img
- fastboot flash vbmeta vbmeta.img
- fastboot flash super super.img.sparsechunk.0
- fastboot flash super super.img.sparsechunk.1
- fastboot flash super super.img.sparsechunk.2
- fastboot flash super super.img.sparsechunk.3
- fastboot flash super super.img.sparsechunk.4
- fastboot flash super super.img.sparsechunk.5
- fastboot flash super super.img.sparsechunk.6
- fastboot flash super super.img.sparsechunk.7
- Toggle back to bootloader. Do the following:
- fastboot reboot bootloader
- fastboot erase carrier
- fastboot erase metadata
- fastboot erase ddr
- (Optional except you want to wipe) fastboot erase userdata
- fastboot reboot
- Now your device will reboot into bootloader with the firmware you installed.
That’s it, guys. We hope this guide was helpful to you. Feel free to ask in the comment below for additional queries.
fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash bluetooth BTFM.bin fastboot flash dsp dspso.bin fastboot flash radio radio.img fastboot flash logo logo.bin
fastboot reboot fastboot
fastboot flash boot boot.img fastboot flash recovery recovery.img fastboot flash dtbo dtbo.img fastboot flash vbmeta vbmeta.img fastboot flash super super.img.sparsechunk.0 fastboot flash super super.img.sparsechunk.1 fastboot flash super super.img.sparsechunk.2 fastboot flash super super.img.sparsechunk.3 fastboot flash super super.img.sparsechunk.4 fastboot flash super super.img.sparsechunk.5 fastboot flash super super.img.sparsechunk.6 fastboot flash super super.img.sparsechunk.7
fastboot reboot bootloader fastboot erase carrier fastboot erase metadata fastboot erase ddr (Optional except you want to wipe) fastboot erase userdata fastboot reboot
In the meantime, if you liked this content and want to read more content, for more such awesome coverage, you can head over to our check out our Windows Guides, Gaming Guides, Social Media Guides, iPhone, and Android Guides to read more. Make sure to subscribe to our YouTube Channel for awesome videos related to Android, iOS, and Gaming. So, until the next post…Cheers!
